Entries Tagged 'isdn Adaptors' ↓

A. PBX
B. ISDN
C. SLC
D. PSTN

The right answer here is B for ISDN since PBX, SLC or PSTN are all related to telecommunication or telephony services.

I'm using my sambung X-700 moblie for internet connectivity, What I want is, to connect my other two PC's as well to the net with same USB Modem. Now the question is, like the ISDN Line, that we put in Router and distribute the line to others in LAN, Is it possible to connect USB Modem in to some router (Pl give the Brands available in India) and distribute the connection? What are the other H/W & S/W required for other two system, with this system I'm using Win XP SP-2, I'm not a networking guy, so pl help me out in this regard…….

If other computers are connected with Switch or hub. you just make a workgroup of computers .

After this just share the internet connection from properties of your dial up connection of USB.

hi
first of all make connectivity among all the computer thru CAT 5 cable .

how 2 make it
`1. share the network connection

2 note the ip add of the machine whose network connection is shared
than
3 enter that ip as prefered DNS

all thiscan work only on Workgroup

i hope that u can try this

bye…….

ok no router needed. your pc #1 that is connected to phone via usb should have network card. pc #2 needs 1 card. on pc #1 enable connection sharing and setup an advanced network connection. go to control panel, network setup wizzard, computer connects directly to the internet pc. and then you do the rest. just follow instructions and on pc 2 select this pc connects through a residential gateway or another pc

i live in the ar*e of nowhere and as a result do not recieve broadband the only thing that fone companys will sell to me is ISDN, now i got the box from Eircomm but have hit a snag getting hold of a modem, I was told wen i asked for one in maplins "We dont sell them anymore theyre obselete"
i have tried the external usb modems and they cause nothing but trouble, the pc they are attached to frequently crashes especially wen somone picks up the housefone (the box is dual line and this happens even wen the pc is using one line), and the drivers are correct and up to date
Its annoying how they can sell the box but not the card

I ordered one from Watford Electronics (savastore.com) and it never arrived, i have chased it up but got sick of being lied to.

does anyone know of anywhere else that i can get a working card?

You can't really live in the a%#* hole of nowhere if there is a Maplins store near you or did you buy over the internet?
Try Peats of Parnell street… peats.com
Powercity.ie
/totterdells.ie/
or do a google.ie search, I don't understand why Eircomm could not help you. when you bought the box what else did they say you needed?

To be truly prepared for your CCNA and CCNP exams, you need real hands-on experience with real Cisco routers and switches. However, a production network is a really bad place to practice your configurations, but an excellent way to get fired and/or sued. the key to becoming a true CCNA and CCNP is assembling your own Cisco home lab.

You don’t have to spend a lot of money to do so; used Cisco equipment is cheaper than ever. It’s robust as well – I’ve bought literally hundreds of used routers and switches over the years and have had very few problems. I owe much of my skill to practicing configurations and troubleshooting in my own home lab.

2501 routers are fantastic for CCNA and CCNP home labs. They come with two serial interfaces, allowing you to connect one interface directly to another router (you’ll need a DTE/DCE cable for that, too) while connecting another to a frame relay switch if you like. If you don’t have a frame relay switch, you can connect a 2501 directly to two other routers via the serial interfaces.

You also have an AUI port, which requires a transceiver to operate as your Ethernet interface. Transceivers are pretty cheap and readily available from Cisco resellers and ebay vendors, so pick one up for each 2503 you decide to buy.

2501 routers don’t come with BRI interfaces, but not every router in your lab has to be ISDN-ready. If you choose not to have ISDN in your lab at all, 2501s are the way to go. If you do want to run ISDN and have an ISDN simulator device, you can get two 2503s and the rest of your routers can be 2501.

All in all, 2501 routers are great for your CCNA / CCNP home lab. They cost less than $100 each on ebay, so they’re also very affordable. There’s no better training than training on your own CCNA or CCNP home lab, and you can always sell the equipment later if you like. Basically, you’re renting the routers and switches, and the experience you get by working with the real deal is invaluable.

Cuisinart Automatic Burr Mill